The Armtech Hybrid Battery Isolator is an electromechanical replacement for the standard type master switch and offers a complete method of isolating the battery and protecting the alternator in one box with no external resistors or untidy wiring. It consists of a heavy duty control box that is normally mounted close to the vehicle's battery. Three remote switches (all supplied) control the unit; two cockpit mounted (one ON and one OFF) buttons are operated by the driver, and an external waterproof OFF switch can be operated by the marshals in the event of an accident. Any numnber of additional switches can be added if required. An indicator light on the unit lights when the unit is armed, as does another attached to the driver operated ON switch.

The unit is capable of switching 1000amps starting current intermittently (250amps continuous) and 250amps alternator current. The alternator is prtected upon disconnection from the battery.

The switches are wired to the unit using low voltage and current cable (not included). In the event of an accident where any of the control wires are severed the unit will automatically be turned off.

Weight of the unit is 700 grammes. A safety sticker sheet and full instructions are also supplied.

70BC06 Hybrid Battery Isolator